Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pliers
- Tape measure
- Pipe thread seal tape
Step-by-Step Installation
- Choose Installation Location: Select a level, solid floor location near water supply and drain connections with proper electrical outlet.
- Remove Shipping Materials: Remove all shipping bolts, brackets, and packaging materials from the washer drum and exterior.
- Connect Water Supply: Connect hot and cold water supply lines to the corresponding inlet valves using new hoses with rubber washers.
- Connect Drain Hose: Install drain hose into standpipe or laundry sink, ensuring proper height to prevent siphoning.
- Electrical Connection: Plug into dedicated 120V, 60Hz grounded outlet. Do not use extension cords or adapters.
- Level the Washer: Adjust the four leveling legs to ensure washer is perfectly level and stable on all sides.
- Initial Test Run: Run the washer through a complete cycle with no load to verify proper operation and check for leaks.
Specifications
| Model Series | MVW7232HW |
| Type | Top Load Washer |
| Color | White |
| Capacity | 7.0 cu. ft. |
| Noise Level | 65 dB |
| Control Type | Electronic Controls with LED Display |
| Energy Rating | ENERGY STAR® Certified |
| Water Consumption | 13.5 gallons per cycle |
| Power Requirements | 120V, 60Hz, 15A |
| Dimensions (HxWxD) | 44 x 29 x 28 inches |
| Weight | 185 lbs |
| Max Spin Speed | 900 RPM |
Warranty Information
- Full Warranty: 1 year parts and labor
- Drive System Warranty: 10 years on motor and transmission
- Additional Coverage: Optional extended warranty available
For warranty service, contact Maytag Customer Service at 1-800-344-1274 or visit Maytag.com
Key Features
PowerWash® Cycle
Maytag's PowerWash cycle uses a powerful spray system and optimized wash motions to remove tough stains in just 60 minutes with better cleaning performance.
PowerWash® Agitator
The exclusive PowerWash agitator features deep clean fins and dual action wash plates that work together to lift and separate clothes for thorough cleaning.
Extra Power Button
Engage the Extra Power button for increased agitation speed and wash time to tackle heavily soiled items and stubborn stains with enhanced cleaning power.
Deep Water Wash Option
This feature allows you to select the optimal water level for your load size, ensuring proper cleaning for small, medium, large, or extra-large loads.
Quick Wash Cycle
Clean lightly soiled clothes in just 30 minutes with the Quick Wash cycle, perfect for when you need clean clothes in a hurry.
Stain Removal Guide
Built-in stain removal guide helps you select the right cycle and options for common stains like grass, wine, grease, and blood.
Wash Cycle Options
Normal
For everyday items like t-shirts, jeans, and towels with warm water rinse
Heavy Duty
For heavily soiled work clothes and sturdy fabrics with extra wash time
Delicates
Gentle cycle for lingerie, silk, and other delicate fabrics with slow agitation
Bulky Items
Special cycle for comforters, pillows, and large bedding with extended soak
Whitest Whites
Hot water cycle with extra rinse to keep white fabrics bright and clean
Hand Wash
Ultra-gentle cycle that mimics hand washing for delicate wool and silk items
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Washer won't start | Power cord not plugged in, lid not closed, circuit breaker tripped | Check power connection, ensure lid is closed, reset circuit breaker |
| Poor cleaning results | Overloading, incorrect detergent amount, wrong cycle selection | Reduce load size, use HE detergent, select appropriate cycle |
| Water not filling | Water supply valves closed, kinked hoses, clogged inlet screens | Open water valves, straighten hoses, clean inlet screens |
| Water leaking | Loose hose connections, over-sudsing, damaged tub seal | Tighten connections, reduce detergent, check tub seal |
| Loud noises during operation | Foreign objects in drum, unbalanced load, worn bearings | Remove foreign objects, redistribute load, check bearings |
| Washer vibrates excessively | Unlevel installation, unstable floor, shipping materials not removed | Level the washer, reinforce floor, remove all shipping materials |
Error Codes
- F1 E1: Water supply issue - Check water pressure and inlet valve
- F2 E2: Drain issue - Check drain hose and pump for clogs
- F3 E3: Lid lock problem - Ensure lid closes and locks properly
- F5 E5: Motor issue - Contact authorized service center
- F7 E1: Water temperature sensor - Check heating element
- F8 E1: Communication error - Power cycle the washer
Manual Downloads
Current Model Manuals
MVW7232HW
7.0 cu. ft. Top Load Washer
MVW7230HW
7.0 cu. ft. Smart Washer
MVW7220HW
5.3 cu. ft. Top Load Washer
MVW7200HW
4.8 cu. ft. Compact Washer
Popular Previous Models
MVWX700XW
6.0 cu. ft. Extra Capacity
MVWC565FW
5.6 cu. ft. Front Load
MVWB765FW
4.8 cu. ft. Stackable
MVWB955FW
5.3 cu. ft. Commercial Grade