Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pipe wrench
- Tape measure
Step-by-Step Installation
- Choose Installation Location: Select a level, solid floor location near plumbing and electrical connections with adequate ventilation.
- Remove Shipping Materials: Remove all transit bolts and packaging materials from both washer and dryer units.
- Connect Water Supply: Connect hot and cold water supply lines to the washer inlet valves using new hoses only.
- Connect Drain Hose: Route washer drain hose into standpipe with proper height to prevent siphoning.
- Vent Installation: Install rigid metal or flexible metal venting for dryer exhaust, keeping it as short and straight as possible.
- Electrical Connection: Connect to properly grounded 120V outlet for washer and 240V outlet for electric dryer (or gas connection for gas models).
- Level the Units: Adjust leveling feet to ensure both washer and dryer are perfectly level.
- Test Run: Run both units through complete cycles to check for proper operation and leaks.
Specifications
| Model Series | MVP575GW / MED575GW |
| Type | Front Load Washer & Electric Dryer |
| Color | Graphite Steel / White |
| Washer Capacity | 5.2 cu. ft. |
| Dryer Capacity | 7.4 cu. ft. |
| Noise Level | Washer: 68 dB / Dryer: 65 dB |
| Control Type | Electronic Controls with LED Display |
| Energy Rating | ENERGY STAR® Certified |
| Water Consumption | 13 gallons per cycle (average) |
| Power Requirements | Washer: 120V / Dryer: 240V |
| Dimensions (HxWxD) | Washer: 39" x 27" x 32" / Dryer: 39" x 27" x 32" |
| Weight | Washer: 205 lbs / Dryer: 125 lbs |
| Max Spin Speed | 1300 RPM |
Warranty Information
- Full Warranty: 1 year parts and labor
- Drive System Warranty: 10 years on washer drive system
- Motor Warranty: 10 years on dryer motor
- Additional Coverage: Optional extended warranty available
For warranty service, contact Maytag Customer Service at 1-800-344-1274 or visit Maytag.com
Key Features
Pet Pro Filter System
Advanced filtration system designed to effectively remove and contain pet hair, lint, and dander during the wash cycle, preventing redistribution onto clothes.
PowerWash® Cycle
Heavy-duty cycle that uses high-pressure jets and optimal wash motions to remove tough, set-in stains in just 60 minutes with better cleaning performance.
Extra Power Button
Boosts cleaning performance by increasing wash time, water temperature, and tumble speed for heavily soiled items and pet bedding.
Steam Refresh Cycle
Dryer steam feature helps reduce wrinkles and odors, refreshing clothes and removing pet hair without the need for washing.
Advanced Moisture Sensing
Dryer automatically senses moisture levels and adjusts drying time accordingly, preventing over-drying and saving energy.
Stain Remover Guide
Built-in guide helps identify and treat common pet-related stains with recommended settings and pretreatment options.
Special Pet Care Cycles
Pet Bedding Cycle
Deep cleaning cycle with extra rinses specifically designed for pet beds and heavily soiled pet items
Allergen Cycle
High-temperature wash with steam to remove pet dander and allergens from fabrics
Quick Wash
Fast 30-minute cycle for lightly soiled pet items and quick cleanups
Sanitize Cycle
Eliminates 99.9% of household bacteria using high water temperatures
Delicates Cycle
Gentle cleaning for pet clothing and delicate fabric items
Bulky Items Cycle
Special cycle for large pet items like blankets and comforters
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Pet hair not removed | Pet Pro filter clogged, overloaded, wrong cycle | Clean filter, reduce load size, use Pet Hair cycle |
| Washer won't start | Door not closed, power issue, control lock on | Ensure door latched, check power, disable control lock |
| Dryer not heating | Gas supply off, circuit breaker tripped, vent clogged | Check gas valve, reset breaker, clean vent system |
| Excessive vibration | Unbalanced load, uneven floor, shipping bolts in | Redistribute load, level machine, remove transit bolts |
| Water not draining | Drain hose clogged, drain pump filter blocked | Check hose for kinks, clean drain pump filter |
| Clothes too wet after spin | Overloaded, drain issue, wrong spin speed | Reduce load, check drain, select higher spin speed |
Error Codes
- F1 E1: Water supply issue - Check water inlet and pressure
- F2 E2: Drain problem - Check drain hose and pump
- F3 E3: Temperature sensor failure - Contact service
- F5 E5: Door lock malfunction - Check door switch
- F7 E1: Motor control issue - Unplug and restart
- F8 E1: Communication error - Reset control panel
Manual Downloads
Current Pet Pro Models
MVP575GW
5.2 cu. ft. Pet Pro Washer
MED575GW
7.4 cu. ft. Pet Pro Dryer
MVP576GW
5.2 cu. ft. Steam Washer
MED576GW
7.4 cu. ft. Steam Dryer
Popular Previous Models
MVW7230HW
4.8 cu. ft. Pet Pro Washer
MED7230HW
7.0 cu. ft. Pet Pro Dryer
MVW6200KW
4.3 cu. ft. Pet Care Washer
MED6200KW
7.0 cu. ft. Pet Care Dryer