Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pliers
- Tape measure
Step-by-Step Installation
- Choose Installation Location: Select a location near necessary plumbing and electrical connections on a solid, level floor.
- Remove Shipping Materials: Remove all shipping bolts and packaging materials from the washing machine.
- Connect Water Supply: Connect hot and cold water supply lines to the water inlet valves. Use only new hoses.
- Connect Drain Hose: Route the drain hose into a standpipe or laundry tub with a high loop to prevent backflow.
- Electrical Connection: Connect to a properly grounded 120V, 60Hz, AC only outlet. Do not use an extension cord.
- Level the Washing Machine: Adjust the leveling legs to ensure the washing machine is level from front to back and side to side.
- Test Run: Run the washing machine through a complete cycle to check for leaks and proper operation.
Specifications
| Model Series | MTW4550HW |
| Type | Front Load Washing Machine |
| Color | White / Stainless Steel |
| Capacity | 9.5 kg |
| Noise Level (Wash/Spin) | 52 dB / 68 dB |
| Control Type | Electronic Controls with LED Display |
| Energy Rating | ENERGY STAR® Certified |
| Water Consumption | 8,900 L/year |
| Power Requirements | 120V, 60Hz, 15A |
| Dimensions (HxWxD) | 86 x 61 x 58 cm |
| Weight | 67 kg |
| Max Spin Speed | 1300 RPM |
Warranty Information
- Full Warranty: 1 year parts and labor
- Motor Warranty: 10 years on drive motor
- Additional Coverage: Optional extended warranty available
For warranty service, contact Maytag Customer Service at 1-800-344-1274 or visit Maytag.com
Key Features
PowerWash® Cycle
Maytag's PowerWash cycle uses high-pressure water jets and optimized wash motions to remove tough stains in just 60 minutes, providing superior cleaning performance.
Advanced Vibration Control
Patented vibration control system reduces noise and movement during spin cycles, ensuring quiet operation even at maximum spin speeds.
Fresh Hold® Option
Keeps clothes fresh for up to 16 hours after the cycle ends by periodically tumbling and using cool air to prevent mildew and odors.
Steam Refresh
Steam technology helps remove wrinkles and odors from lightly worn clothes, refreshing them without a full wash cycle.
Maytag® Mobile App
Wi-Fi enabled for remote monitoring and control via smartphone app, allowing you to start, stop, and monitor cycles from anywhere.
Stain Removal Guide
Built-in stain removal guide with pre-programmed settings for common stains like wine, grass, and grease for optimal cleaning results.
Wash Cycle Options
Normal
For everyday cotton and mixed fabric loads with average soil levels
Heavy Duty
Intensive cleaning for heavily soiled work clothes and sturdy fabrics
Delicates
Gentle cycle for delicate fabrics like silk, lace, and synthetic blends
Quick Wash
Fast 30-minute cycle for lightly soiled items that need quick cleaning
Whites
Hot water cycle with extra rinse for brightening white fabrics
Bedding
Special cycle for bulky items like comforters and bed sheets
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Washer won't start | Power issue, door not closed, control lock activated | Check power supply, ensure door latched, check control lock |
| Poor cleaning results | Overloading, incorrect detergent, wrong cycle selection | Reduce load size, use HE detergent, select proper cycle |
| Water not draining | Clogged drain pump, kinked drain hose | Clean drain pump filter, check drain hose for obstructions |
| Water leaking | Loose connections, damaged door seal, over-sudsing | Tighten connections, inspect door seal, use less detergent |
| Loud noises | Foreign objects in drum, unbalanced load | Remove foreign objects, redistribute load evenly |
| Excessive vibration | Uneven floor, shipping bolts not removed, unbalanced load | Level machine, remove shipping bolts, redistribute load |
Error Codes
- F1: Water supply issue - Check water pressure and inlet valve
- F2: Drain issue - Check drain hose and pump filter
- F3: Temperature sensor failure - Contact service
- F4: Motor control issue - Contact service center
- F5: Door lock malfunction - Ensure door closes properly
- F6: Unbalanced load - Redistribute clothes and restart
Manual Downloads
Current Model Manuals
MTW4550HW
9.5kg Front Load Washer
MTW4555HW
9.5kg Steam Washer
MTW4560HW
9.5kg Smart Washer
MTW4570HW
9.5kg Commercial Washer
Popular Previous Models
MVWX655DW
10.5kg Front Load Washer
MVWC565FW
9kg Steam Washer
MVWX500XW
9kg Smart Washer
MVWB765FW
8kg Front Load Washer