Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pliers
- Tape measure
- 4-inch duct clamp
Step-by-Step Installation
- Choose Installation Location: Select a location near necessary electrical or gas connections on a solid, level floor with proper ventilation.
- Remove Shipping Materials: Remove all shipping bolts and packaging materials from the dryer.
- Ventilation Setup: Install 4-inch diameter metal ductwork, keeping it as straight and short as possible with minimal bends.
- Gas Connection (Gas Models): Connect to gas supply using new flexible gas connector. Check for leaks with soap solution.
- Electrical Connection: Connect to properly grounded 120V, 60Hz outlet for electric models or 120V for gas models ignition system.
- Level the Dryer: Adjust the leveling legs to ensure the dryer is level from front to back and side to side.
- Test Run: Run the dryer through a complete cycle to check for proper operation and ventilation.
Specifications
| Model Series | MED5630HW |
| Type | Electric/Gas Dryer |
| Color | White |
| Capacity | 7.0 cu. ft |
| Noise Level | 65 dB |
| Control Type | Electronic Controls with LED Display |
| Energy Rating | ENERGY STAR® Certified |
| Power Requirements (Electric) | 240V, 60Hz, 30A |
| Power Requirements (Gas) | 120V, 60Hz, 15A (Ignition System) |
| Dimensions (HxWxD) | 43 x 76 x 78 cm |
| Weight | 62 kg |
| Heat Settings | 4 Temperature Settings |
Warranty Information
- Full Warranty: 1 year parts and labor
- Motor Warranty: 10 years on drive motor
- Drum Warranty: Lifetime limited warranty
- Additional Coverage: Optional extended warranty available
For warranty service, contact Maytag Customer Service at 1-800-344-1274 or visit Maytag.com
Key Features
Advanced Moisture Sensing
Automatically detects when clothes are dry and shuts off, preventing over-drying and saving energy while protecting your fabrics.
Wrinkle Shield® Option
Keeps clothes moving periodically after the cycle ends to help prevent wrinkles from setting in when you can't unload immediately.
Steam Refresh Cycle
Uses steam to remove wrinkles and odors from clothes that have been sitting in the dryer or closet, refreshing them without washing.
Extra Power Button
Boosts drying performance for heavily soiled items or when you need faster drying times with increased airflow and temperature.
Stainless Steel Drum
Durable stainless steel construction resists chipping and rusting, providing long-lasting performance and gentle fabric care.
Quick Dry Cycle
Dries small loads in as little as 20 minutes, perfect for when you need a few items dried quickly.
Drying Cycles Explained
Auto Dry
Automatically adjusts drying time based on moisture levels for optimal results
Timed Dry
Manual setting for specific drying durations from 10 to 180 minutes
Wrinkle Control
Uses steam and tumbling action to reduce wrinkles in stored clothing
Delicates
Low heat setting with gentle tumbling for delicate fabrics
Heavy Duty
High heat setting for towels, jeans, and heavily soiled items
Air Fluff
No heat cycle that uses room temperature air to fluff pillows and comforters
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dryer won't start | Power issue, door not closed properly, start button not held | Check power supply, ensure door is latched, press and hold start button for 3 seconds |
| Clothes not drying | Lint filter clogged, vent system blocked, overloading | Clean lint filter, check vent system for obstructions, reduce load size |
| Dryer is noisy | Foreign objects in drum, worn rollers or bearings | Check for foreign objects, inspect drum rollers and bearings |
| Dryer gets too hot | Thermostat failure, restricted airflow, cycling thermostat issue | Check ventilation, clean lint filter, contact service for thermostat repair |
| Gas odor (Gas models) | Gas leak, improper combustion | Immediately turn off gas supply, ventilate area, contact qualified technician |
| Error codes displayed | Various system malfunctions | Refer to error code section below, contact service if persistent |
Error Codes
- F-01: Control board communication error - Power cycle unit
- F-02: Motor triac error - Check for obstruction, reset unit
- F-03: Thermistor open circuit - Contact service center
- F-05: Heater error - Check heating element, thermal fuses
- F-07: Moisture sensor error - Clean sensor bars, check connections
- F-11: Motor error - Check for belt issues, motor operation
Manual Downloads
Current Model Manuals
MED5630HW
7.0 cu. ft Electric Dryer
MG5630HW
7.0 cu. ft Gas Dryer
MED5730HW
7.3 cu. ft Steam Dryer
MED5630HW0
7.0 cu. ft White Dryer
Popular Previous Models
MEDX500HW
7.0 cu. ft Electric Dryer
MGDC400HW
7.0 cu. ft Gas Dryer
MEDC400HW
6.7 cu. ft Electric Dryer
MGDX500HW
7.0 cu. ft Gas Dryer