Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pliers
- Tape measure
- 4-inch diameter rigid metal duct
Step-by-Step Installation
- Choose Installation Location: Select a location near electrical outlet and venting on a solid, level floor with adequate clearance.
- Remove Shipping Materials: Remove all shipping bolts and packaging materials from the dryer.
- Install Exhaust Vent: Connect 4-inch diameter rigid metal duct to dryer exhaust outlet. Avoid flexible plastic ducts.
- Gas Connection (Gas Models): Connect gas line using approved flexible connector. Check for leaks with soap solution.
- Electrical Connection: Connect to a properly grounded 120V, 60Hz, AC only outlet. Electric models require 240V outlet.
- Level the Dryer: Adjust the leveling legs to ensure the dryer is level from front to back and side to side.
- Test Run: Run the dryer through a complete cycle to check for proper operation and venting.
Specifications
| Model Series | MEDC700VW / MEDC700BW |
| Type | Electric / Gas Dryer |
| Color | White / Black |
| Capacity | 7.0 cu. ft |
| Noise Level | 65 dB |
| Control Type | Manual Dial Controls |
| Energy Rating | ENERGY STAR® Certified |
| Power Requirements | 120V (Gas) / 240V (Electric), 60Hz |
| Dimensions (HxWxD) | 43 x 29 x 28 inches |
| Weight | 125 lbs (Electric) / 130 lbs (Gas) |
| Drum Material | Porcelain-enameled steel |
Warranty Information
- Full Warranty: 1 year parts and labor
- Motor Warranty: 10 years on drive motor
- Drum Warranty: Lifetime limited warranty
For warranty service, contact Maytag Customer Service at 1-800-344-1274 or visit Maytag.com
Key Features
Advanced Moisture Sensing
Automatically detects when clothes are dry and shuts off, preventing over-drying and saving energy while protecting your fabrics.
Wrinkle Prevent Option
Tumbles clothes without heat at the end of the cycle to help prevent wrinkles from setting in when you can't unload immediately.
Porcelain-Enameled Drum
Durable drum surface is gentle on clothes and resists chipping and rusting, providing long-lasting performance and fabric care.
Multiple Dry Cycles
Includes cycles for heavy duty, casual, delicate, quick dry, air fluff, and more to handle all your drying needs effectively.
Large Capacity
7.0 cubic foot capacity handles large family loads, including bulky items like comforters and blankets with ease.
ENERGY STAR® Certified
Meets strict energy efficiency guidelines set by the EPA, using less energy and helping you save money on utility bills.
Dry Cycle Options
Heavy Duty
High heat setting for heavily soiled items like towels and jeans
Casual
Medium heat for everyday clothes and mixed loads
Delicate
Low heat for delicate fabrics and special care items
Quick Dry
Fast drying for small loads or lightly damp items
Air Fluff
No heat for freshening pillows or removing pet hair
Timed Dry
Manual drying for specific time periods from 10-120 minutes
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dryer won't start | Power issue, door not closed properly, start button not held | Check power supply, ensure door is latched completely, hold start button for 3 seconds |
| Clothes taking too long to dry | Overloading, lint filter clogged, improper venting | Reduce load size, clean lint filter, check vent system for restrictions |
| Dryer is noisy | Foreign objects in drum, worn rollers or bearings | Check for foreign objects, inspect drum rollers and bearings |
| Dryer stops during cycle | Overheating, power interruption, door opened | Check venting, ensure proper power supply, close door completely |
| Clothes too hot at end of cycle | Over-drying, cooling cycle interrupted | Use moisture sensing cycle, ensure cooling cycle completes |
| Dryer doesn't heat | Thermal fuse blown, heating element failed, gas supply issue | Check thermal fuse, heating element, or gas supply and ignition |
Error Codes
- F01: Control board failure - Contact service center
- F02: Motor triac error - Check motor and connections
- F03: Thermistor open circuit - Check temperature sensor
- F04: Thermistor short circuit - Replace temperature sensor
- F05: Heater relay error - Check heating element and relays
- F07: Motor stalled - Check for obstruction or motor failure
Manual Downloads
Current Model Manuals
MEDC700VW
7.0 cu. ft Electric Dryer
MEDC700BW
7.0 cu. ft Electric Dryer
MGDC700VW
7.0 cu. ft Gas Dryer
MGDC700BW
7.0 cu. ft Gas Dryer
Popular Previous Models
MEDC400VW
4.0 cu. ft Electric Dryer
MEDC500BW
5.0 cu. ft Electric Dryer
MGDC600VW
6.0 cu. ft Gas Dryer
MEDC550BW
5.5 cu. ft Electric Dryer