Installation Guide
Tools Needed:
- Adjustable wrench
- Pipe wrench
- Screwdrivers (flat and Phillips)
- Level
- Tape measure
- Pipe thread sealant
Step-by-Step Installation
- Select Location: Choose a solid, level concrete floor near plumbing and electrical connections with adequate ventilation.
- Remove Shipping Materials: Remove all transit bolts and packaging materials from the washer.
- Connect Water Supply: Connect hot and cold water supply lines using commercial-grade hoses and proper thread sealant.
- Install Drain System: Route drain hose to approved standpipe with air gap to prevent backflow and siphoning.
- Electrical Connection: Connect to dedicated 120V, 60Hz, 15-20 amp grounded outlet. Commercial installation may require 208-240V.
- Level the Washer: Adjust front leveling legs to ensure machine is perfectly level in all directions.
- Initial Test Run: Run empty cycle to check for leaks, proper operation, and drain function.
Specifications
| Model Series | MVWC565FW / MVWC565HW |
| Type | Top Load Commercial Washer |
| Color | White / Metallic |
| Capacity | 3.5 cu. ft. (Commercial Grade) |
| Noise Level | 68 dB (Operating) |
| Control Type | Mechanical Dial with Push Buttons |
| Energy Rating | ENERGY STAR® Certified |
| Water Consumption | Variable based on cycle selection |
| Power Requirements | 120V, 60Hz, 15A (Standard) / 208-240V (Commercial) |
| Dimensions (HxWxD) | 43 x 27 x 28 inches |
| Weight | 145 lbs |
| Max Spin Speed | 700 RPM |
Warranty Information
- Commercial Warranty: 1 year parts and labor
- Motor Warranty: 3 years on commercial motor
- Transmission Warranty: 10 years limited
- Extended Coverage: Commercial service contracts available
For commercial warranty service, contact Maytag Commercial Support at 1-800-688-9900 or visit MaytagCommercial.com
Key Features
Commercial-Grade Motor
Heavy-duty direct drive motor designed for continuous commercial operation with minimal maintenance and maximum reliability.
Stainless Steel Wash Basket
Durable stainless steel construction resists chipping, rust, and damage from commercial cleaning chemicals and heavy use.
Advanced Vibration Control
Commercial-grade suspension system with reinforced components minimizes vibration during high-speed spin cycles.
Heavy-Duty Transmission
Industrial-strength transmission built to withstand the demands of commercial laundry operations with extended warranty coverage.
Multiple Cycle Options
Pre-programmed cycles optimized for commercial use including heavy-duty, normal, delicate, and quick wash settings.
Commercial Water Systems
High-flow water valves and large capacity hoses designed for rapid fill times and efficient water usage in commercial settings.
Commercial Cycle Options
Heavy Duty
Extended cycle for heavily soiled commercial linens and work uniforms
Normal
Standard commercial cycle for everyday laundry needs
Quick Wash
Rapid cycle for lightly soiled items requiring fast turnaround
Delicate
Gentle cycle for sensitive fabrics and uniforms
Bulky Items
Special cycle for large commercial items like mats and curtains
Rinse & Spin
Additional rinse cycle for commercial operations requiring extra rinsing
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Washer won't start | Power issue, lid not closed, commercial timer setting | Check power supply, ensure lid is closed, verify timer position |
| Poor cleaning in commercial use | Overloading, incorrect detergent, hard water buildup | Follow load capacity guidelines, use commercial detergent, descale if needed |
| Water not draining | Drain hose clogged, pump obstruction, commercial drain restrictions | Check drain system, clean pump filter, ensure proper drain height |
| Water leakage | Hose connection loose, over-sudsing, worn door seal | Tighten connections, reduce detergent, inspect and replace seals |
| Excessive vibration | Unbalanced load, uneven floor, shipping bolts not removed | Redistribute load, level machine, remove all shipping materials |
| Motor hums but won't start | Motor capacitor failure, belt issues, mechanical obstruction | Check capacitor, inspect drive system, clear any obstructions |
Commercial Error Indicators
- LF: Long Fill - Check water supply pressure and inlet valves
- LD: Long Drain - Check drain system for restrictions
- F1: Lid Lock Error - Lid not locking properly
- F2: Motor Control Error - Motor or control board issue
- F3: Water Temperature Error - Temperature sensor failure
- F5: Pressure System Error - Water level sensor malfunction
Manual Downloads
Current Commercial Models
MVWC565FW
3.5 cu. ft. Commercial Washer
MVWC565HW
3.5 cu. ft. Heavy Duty
MVWC755DW
Commercial Stacked Unit
MVWC766FW
Large Capacity Commercial
Previous Commercial Models
MLG22PDAWW
Commercial Top Load
MAH8700DWW
Heavy Duty Commercial
MVWX500XW
Extra Capacity Commercial
MVWC400XW
Standard Commercial