Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pliers
- Tape measure
- 4-inch diameter rigid metal duct
Step-by-Step Installation
- Choose Installation Location: Select a location near electrical connection on a solid, level floor with proper ventilation.
- Remove Shipping Materials: Remove all shipping bolts and packaging materials from the dryer.
- Install Exhaust Duct: Connect 4-inch diameter rigid metal duct to dryer exhaust outlet. Avoid flexible plastic ducts.
- Ventilation Setup: Ensure proper outdoor ventilation with maximum duct length of 35 feet (add 5 feet for each 90° elbow).
- Electrical Connection: Connect to a properly grounded 240V, 60Hz outlet. Gas models require 120V outlet.
- Gas Connection (Gas Models Only): Connect to gas supply using new flexible gas connector. Check for leaks with soap solution.
- Level the Dryer: Adjust the leveling legs to ensure the dryer is level from front to back and side to side.
- Test Run: Run the dryer through a complete cycle to check for proper operation and ventilation.
Specifications
| Model Series | MEDC400XW |
| Type | Electric Dryer |
| Color | White |
| Capacity | 7.4 cu. ft. |
| Noise Level | 65 dB |
| Control Type | Electronic Controls with LED Display |
| Energy Rating | ENERGY STAR® Certified |
| Power Requirements | 240V, 60Hz, 30A (Electric) / 120V, 60Hz (Gas) |
| Dimensions (HxWxD) | 43 x 76 x 30 inches |
| Weight | 125 lbs |
| Drum Material | Stainless Steel |
| Moisture Sensor | Advanced Moisture Sensing |
Warranty Information
- Full Warranty: 1 year parts and labor
- Motor Warranty: 10 years limited warranty
- Additional Coverage: Optional extended warranty available
For warranty service, contact Maytag Customer Service at 1-800-344-1274 or visit Maytag.com
Key Features
Advanced Moisture Sensing
Automatically detects moisture levels and adjusts drying time accordingly, preventing over-drying and saving energy while protecting your clothes.
XL Capacity
7.4 cubic foot capacity allows you to dry larger loads, including bulky items like comforters and blankets, with fewer cycles needed.
Wrinkle Control Option
Automatically tumbles clothes periodically after the cycle ends to help prevent wrinkles from setting in when you can't unload immediately.
Steam Refresh Cycle
Uses steam to remove wrinkles and odors from clothes that have been sitting in the dryer or closet, refreshing them without washing.
Quick Dry Cycle
Dries small loads quickly and efficiently, perfect for when you need specific items dried in a hurry.
Stainless Steel Drum
Durable stainless steel construction resists rust and chipping, providing a smooth surface that's gentle on all types of fabrics.
Drying Cycles Explained
Auto Dry
Automatically senses moisture and shuts off when clothes are dry
Timed Dry
Manual drying for specific time periods from 10 to 180 minutes
Wrinkle Control
Periodic tumbling after cycle to prevent wrinkles
Steam Refresh
Steam treatment to remove wrinkles and odors
Quick Dry
Fast drying for small loads (20-30 minutes)
Delicates
Gentle drying for delicate fabrics and special care items
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dryer won't start | Power issue, door not closed properly, start button not held | Check power supply, ensure door is latched, hold start button for 3 seconds |
| Clothes not drying | Lint filter clogged, exhaust duct blocked, overloading | Clean lint filter, check exhaust duct, reduce load size |
| Dryer is noisy | Foreign objects in drum, worn rollers or bearings | Check for foreign objects, contact service for roller replacement |
| Over-drying clothes | Moisture sensor dirty, incorrect cycle selection | Clean moisture sensor, use Auto Dry cycle |
| Dryer stops during cycle | Overheating, power interruption, door opened | Check ventilation, ensure proper power supply, close door completely |
| Error codes displayed | Various system faults detected | Refer to error code chart in manual, contact service if persistent |
Error Codes
- F01: Main control failure - Contact service center
- F02: Motor control issue - Check for obstructions, contact service
- F03: Thermal cutoff open - Check ventilation, contact service
- F04: Moisture sensor issue - Clean moisture sensor bars
- F05: User interface error - Unplug dryer for 5 minutes, restart
- F07: Heater error - Contact service center
Manual Downloads
Current Model Manuals
MEDC400XW
7.4 cu. ft. Electric Dryer
MEDC400BW
7.4 cu. ft. Electric Dryer
MGDC400XW
7.4 cu. ft. Gas Dryer
MEDC300XW
6.7 cu. ft. Electric Dryer
Popular Previous Models
MEDX700XW
7.0 cu. ft. Electric Dryer
MEDB800XW
8.0 cu. ft. Electric Dryer
MEDC200XW
6.2 cu. ft. Electric Dryer
MGDC300XW
6.7 cu. ft. Gas Dryer