Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pliers
- Tape measure
- 4-in-1 screwdriver
Step-by-Step Installation
- Choose Installation Location: Select a location on a solid, level floor near proper electrical and venting connections.
- Remove Shipping Materials: Remove all shipping bolts and packaging materials from the dryer.
- Gas Connection (Gas Models): Connect gas line using approved flexible connector. Check for leaks with soap solution.
- Electrical Connection: Connect to a properly grounded 120V, 60Hz, AC only outlet. Gas models require 120V, electric models require 240V.
- Vent Installation: Install 4-inch diameter metal venting material. Keep vent run as short and straight as possible.
- Level the Dryer: Adjust the leveling legs to ensure the dryer is level from front to back and side to side.
- Test Run: Run the dryer through a complete cycle to check for proper operation and heating.
Specifications
| Model Series | MEDC400XW |
| Type | Electric/Gas Dryer |
| Color | White |
| Capacity | 7.4 cu. ft. |
| Noise Level | 65 dB |
| Control Type | Electronic Controls with LED Display |
| Energy Rating | ENERGY STAR® Certified |
| Power Requirements (Electric) | 240V, 60Hz, 30A |
| Power Requirements (Gas) | 120V, 60Hz, 15A |
| Dimensions (HxWxD) | 43 x 29 x 31 inches |
| Weight | 125 lbs (Electric), 130 lbs (Gas) |
| Vent Requirements | 4-inch diameter |
Warranty Information
- Full Warranty: 1 year parts and labor
- Motor Warranty: 10 years on drive motor
- Additional Coverage: Optional extended warranty available
For warranty service, contact Maytag Customer Service at 1-800-344-1274 or visit Maytag.com
Key Features
Advanced Moisture Sensing
Automatically detects when clothes are dry and shuts off, preventing over-drying and saving energy while protecting your fabrics.
XL Capacity
7.4 cubic foot capacity allows you to dry larger loads, including bulky items like comforters and blankets with ease.
Wrinkle Prevent Option
Automatically tumbles clothes without heat at the end of the cycle to help prevent wrinkles from setting in.
Steam Refresh Cycle
Uses steam to help reduce wrinkles and odors in already dry clothes, refreshing them without a full wash cycle.
Quick Dry Cycle
Dries small loads in as little as 30 minutes, perfect for when you need items dried in a hurry.
Stainless Steel Drum
Durable stainless steel construction resists chipping and rusting, providing long-lasting performance and gentle fabric care.
Drying Programs Explained
Auto Dry
Automatically adjusts drying time based on moisture levels for optimal results
Timed Dry
Manual drying with selectable time settings from 10 to 180 minutes
Wrinkle Control
Periodic tumbling without heat to prevent wrinkles from setting
Steam Refresh
Uses steam to remove wrinkles and odors from dry clothes
Quick Dry
Rapid drying for small loads in 30-60 minutes
Heavy Duty
Extended drying time with high heat for bulky items
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dryer won't start | Power issue, door not closed properly, control lock activated | Check power supply, ensure door is latched completely, check control lock settings |
| No heat | Gas supply off, circuit breaker tripped, heating element failed | Check gas valve, reset breaker, test heating element |
| Clothes taking too long to dry | Clogged lint filter, restricted venting, overloaded | Clean lint filter, check venting for restrictions, reduce load size |
| Unusual noises | Foreign objects in drum, worn rollers or belts | Check for foreign objects, inspect rollers and belts for wear |
| Vibration during operation | Unbalanced load, uneven floor, shipping bolts not removed | Redistribute load, level the dryer, ensure shipping bolts removed |
| Error codes displayed | Sensor issues, control board problems | Refer to error code chart, reset dryer, contact service if persistent |
Error Codes
- F-01: Control failure - Reset dryer, if persists contact service
- F-02: Motor circuit failure - Check for obstructions, contact service
- F-03: Thermistor failure - Temperature sensor issue, contact service
- F-04: Heater circuit failure - Check heating element, contact service
- F-05: Moisture sensor failure - Clean sensor bars, contact service if persists
- F-07: Communication error - Reset dryer, contact service
Manual Downloads
Current Model Manuals
MEDC400XW
7.4 cu. ft. Electric Dryer
MEDC400YW
7.4 cu. ft. Gas Dryer
MEDC500XW
7.4 cu. ft. Steam Dryer
MEDC450XW
7.4 cu. ft. Wi-Fi Dryer
Popular Previous Models
MEDX500XW
7.3 cu. ft. Electric Dryer
MEDX500YW
7.3 cu. ft. Gas Dryer
MEDB800XW
7.0 cu. ft. Electric Dryer
MEDB800YW
7.0 cu. ft. Gas Dryer