Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pliers
- Tape measure
- 4-wire power cord (if not included)
Step-by-Step Installation
- Choose Installation Location: Select a location near necessary ventilation and electrical connections on a solid, level floor.
- Remove Shipping Materials: Remove all shipping bolts and packaging materials from the dryer.
- Install Venting System: Connect 4-inch diameter metal venting to the dryer exhaust outlet using clamps.
- Electrical Connection: Connect to a properly grounded 240V, 60Hz outlet. Follow local electrical codes.
- Gas Connection (Gas Models): Connect gas line using approved flexible connector (gas models only).
- Level the Dryer: Adjust the leveling legs to ensure the dryer is level from front to back and side to side.
- Test Run: Run the dryer through a complete cycle to check for proper operation and ventilation.
Specifications
| Model Series | MEDB800BW |
| Type | Electric Dryer |
| Color | White |
| Capacity | 7.4 cu. ft. |
| Noise Level | 65 dB |
| Control Type | Electronic Controls with LED Display |
| Energy Rating | ENERGY STAR® Certified |
| Power Requirements | 240V, 60Hz, 30A |
| Dimensions (HxWxD) | 43 x 29 x 31 inches |
| Weight | 125 lbs |
| Drum Material | Stainless Steel |
| Vent Requirements | 4-inch diameter metal venting |
Warranty Information
- Full Warranty: 1 year parts and labor
- Motor Warranty: 10 years on drive motor
- Drum Warranty: Lifetime limited warranty on stainless steel drum
- Additional Coverage: Optional extended warranty available
For warranty service, contact Maytag Customer Service at 1-800-344-1274 or visit Maytag.com
Key Features
Advanced Moisture Sensing
Automatically senses when clothes are dry and shuts off, preventing over-drying and saving energy while protecting your fabrics.
XL Capacity
7.4 cubic foot capacity allows you to dry large loads, including bulky items like comforters and blankets, with ease.
Wrinkle Control Option
Automatically tumbles clothes without heat at the end of the cycle to help prevent wrinkles from setting in.
Steam Refresh Cycle
Uses steam to remove wrinkles and odors from clothes that have been sitting in the dryer or closet.
Quick Dry Cycle
Dries small loads in as little as 30 minutes, perfect for when you need specific items dried quickly.
Stainless Steel Drum
Durable stainless steel construction resists chipping and rusting, providing long-lasting performance and gentle fabric care.
Drying Cycles Explained
Auto Dry
Automatically senses moisture levels and shuts off when clothes reach selected dryness level
Timed Dry
Manual drying for specific time periods from 10 to 180 minutes
Wrinkle Control
Tumbles clothes without heat periodically to prevent wrinkles
Steam Refresh
Uses steam to remove wrinkles and refresh clothes in 20 minutes
Quick Dry
Fast drying for small loads in 30, 45, or 60 minutes
Heavy Duty
Extended drying time for large, heavy loads like jeans and towels
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dryer won't start | Power issue, door not closed properly, control lock on | Check power supply, ensure door is latched completely, check control lock |
| Clothes not drying | Vent blockage, overloaded, heating element issue | Clean vent system, reduce load size, check heating element |
| Taking too long to dry | Restricted venting, overloaded, high humidity | Check and clean venting system, reduce load size |
| Unusual noises | Foreign objects in drum, worn rollers or belts | Check for foreign objects, inspect rollers and belts |
| Vibration during operation | Unbalanced load, uneven floor | Redistribute load evenly, level the dryer |
| Error codes displayed | Various system faults | Refer to error code chart in manual, reset dryer |
Error Codes
- F01: Control failure - Unplug dryer for 1 minute, then restart
- F02: Motor circuit fault - Check for obstruction, reset dryer
- F03: Thermistor failure - Contact service center
- F04: Heater circuit fault - Check venting, reset dryer
- F05: Moisture sensor fault - Clean moisture sensor bars
- F07: Communication error - Unplug dryer for 1 minute, then restart
Manual Downloads
Current Model Manuals
MEDB800BW
7.4 cu. ft. Electric Dryer
MEDB800BZ
7.4 cu. ft. Steam Dryer
MEDC800BW
7.4 cu. ft. Commercial Dryer
MEDB800BS
7.4 cu. ft. Stackable Dryer
Popular Previous Models
MEDX700BW
7.0 cu. ft. Electric Dryer
MEDC700BW
7.0 cu. ft. Commercial Dryer
MEDB600BW
6.7 cu. ft. Electric Dryer
MEDB500BW
6.5 cu. ft. Basic Dryer