Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pliers
- Tape measure
- 4-inch diameter rigid metal duct
Step-by-Step Installation
- Choose Installation Location: Select a location near electrical connection and venting on a solid, level floor with proper clearance.
- Remove Shipping Materials: Remove all shipping bolts and packaging materials from the dryer.
- Install Exhaust Vent: Connect 4-inch diameter rigid metal duct to dryer exhaust outlet. Avoid flexible plastic ducts.
- Electrical Connection: Connect to a properly grounded 240V, 60Hz outlet. Gas models require 120V outlet for controls.
- Gas Connection (Gas Models): Connect to gas supply using new flexible gas connector. Check for leaks with soap solution.
- Level the Dryer: Adjust the leveling legs to ensure the dryer is level from front to back and side to side.
- Test Run: Run the dryer through a complete cycle to check for proper operation and venting.
Specifications
| Model Series | MEDC500HW |
| Type | Electric Dryer |
| Color | White |
| Capacity | 7.0 cu. ft. |
| Noise Level | 65 dB |
| Control Type | Electronic Controls with LED Display |
| Energy Rating | ENERGY STAR® Certified |
| Power Requirements | 240V, 60Hz, 30A (Electric) / 120V, 60Hz (Gas) |
| Dimensions (HxWxD) | 43 x 29 x 29 inches |
| Weight | 125 lbs |
| Drum Material | Stainless Steel |
| Moisture Sensor | Advanced Moisture Sensing |
Warranty Information
- Full Warranty: 1 year parts and labor
- Motor Warranty: 10 years limited warranty
- Drum Warranty: Lifetime limited warranty
- Additional Coverage: Optional extended warranty available
For warranty service, contact Maytag Customer Service at 1-800-344-1274 or visit Maytag.com
Key Features
Advanced Moisture Sensing
Automatically senses when clothes are dry and shuts off, preventing over-drying and saving energy while protecting your clothes.
7.0 cu. ft. Capacity
Large capacity drum allows you to dry more clothes in fewer loads, saving time and energy while handling bulky items with ease.
Wrinkle Control Option
Automatically tumbles clothes without heat at the end of the cycle to help prevent wrinkles from setting in.
Steam Refresh Cycle
Uses steam to remove wrinkles and odors from clothes that have been sitting in the dryer or closet, refreshing them without washing.
Stainless Steel Drum
Durable stainless steel construction resists chipping and rusting, providing long-lasting performance and gentle fabric care.
Quick Dry Cycle
Dries small loads quickly and efficiently, perfect for when you need specific items in a hurry.
Drying Programs Explained
Auto Dry
Automatically senses moisture levels and shuts off when clothes are dry
Timed Dry
Manual drying with selectable time settings from 10 to 180 minutes
Wrinkle Control
Tumbles clothes without heat to prevent wrinkles from setting
Steam Refresh
Uses steam to remove wrinkles and odors from stored clothes
Quick Dry
Fast drying cycle for small loads and emergency drying needs
Air Fluff
Tumbles clothes with room temperature air, no heat added
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dryer won't start | Power issue, door not closed properly, start button not held | Check power supply, ensure door is latched, hold start button for 3 seconds |
| Clothes not drying | Lint filter clogged, exhaust vent blocked, overloaded | Clean lint filter, check exhaust vent, reduce load size |
| Dryer is noisy | Foreign objects in drum, worn rollers, unbalanced load | Check for foreign objects, inspect rollers, redistribute load |
| Over-drying clothes | Moisture sensor dirty, wrong cycle selected | Clean moisture sensor, select Auto Dry cycle |
| Error codes displayed | Various system faults detected | Refer to error code list below, contact service if needed |
| Vibration during operation | Unbalanced load, uneven floor, shipping bolts not removed | Redistribute load, level the dryer, ensure shipping bolts removed |
Error Codes
- F01: Control failure - Unplug dryer for 5 minutes, then restart
- F02: Motor triac error - Check for obstruction, contact service
- F03: Motor control error - Check motor operation, contact service
- F07: Heater error - Check heating element, contact service
- F08: Moisture sensor error - Clean moisture sensor bars
- F51: Overtemperature error - Check venting, clean lint filter
Manual Downloads
Current Model Manuals
MEDC500HW
7.0 cu. ft. Electric Dryer
MEDC500HW0
7.0 cu. ft. Steam Dryer
MEDC500HW1
7.0 cu. ft. Advanced Dryer
MEDC500HW2
7.0 cu. ft. Wi-Fi Dryer
Popular Previous Models
MEDC400HW
6.7 cu. ft. Electric Dryer
MEDC300HW
6.5 cu. ft. Basic Dryer
MEDB955FW
9.5 cu. ft. Commercial Dryer
MEDX500HW
7.0 cu. ft. Stackable Dryer