Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pliers
- Tape measure
- 4-inch duct clamps
Step-by-Step Installation
- Choose Installation Location: Select a well-ventilated area with proper clearance on all sides on a solid, level floor.
- Remove Shipping Materials: Remove all shipping bolts and packaging materials from the dryer.
- Gas Connection (Gas Models): Connect gas line using approved flexible connector. Check for leaks with soap solution.
- Electrical Connection: Connect to a properly grounded 120V, 60Hz, AC only outlet. Gas models require 120V, electric models require 240V.
- Vent Installation: Install 4-inch diameter metal vent duct. Keep duct run as short and straight as possible.
- Level the Dryer: Adjust the leveling legs to ensure the dryer is level from front to back and side to side.
- Test Run: Run the dryer through a complete cycle to check for proper operation and ventilation.
Specifications
| Model Series | MEDB855DW |
| Type | Electric/Gas Dryer |
| Color | White |
| Capacity | 7.4 cu. ft. |
| Noise Level | 65 dB |
| Control Type | Electronic Controls with LED Display |
| Energy Rating | ENERGY STAR® Certified |
| Power Requirements (Electric) | 240V, 60Hz, 30A |
| Power Requirements (Gas) | 120V, 60Hz, 15A |
| Dimensions (HxWxD) | 43 x 76 x 30 inches |
| Weight | 125 lbs (Electric), 130 lbs (Gas) |
| Vent Requirements | 4-inch diameter metal duct |
Warranty Information
- Full Warranty: 1 year parts and labor
- Motor Warranty: 10 years on drive motor
- Drum Warranty: Lifetime limited warranty
- Additional Coverage: Optional extended warranty available
For warranty service, contact Maytag Customer Service at 1-800-344-1274 or visit Maytag.com
Key Features
Advanced Moisture Sensing
Automatically detects moisture levels and adjusts drying time accordingly, preventing over-drying and saving energy while protecting fabrics.
Steam Refresh Cycle
Uses steam to remove wrinkles and odors from clothes, refreshing garments without needing to rewash them.
Wrinkle Control Option
Tumbles clothes without heat at the end of the cycle to help prevent wrinkles from setting in.
Extra Power Button
Provides increased drying performance for heavily soiled items or when faster drying is needed.
Sanitize Cycle
Uses high temperatures to eliminate 99.9% of household germs and bacteria, perfect for bedding and towels.
Large Capacity Drum
7.4 cubic foot capacity handles large family loads, including bulky items like comforters and pillows.
Drying Cycles Explained
Auto Dry
Automatically senses moisture and stops when clothes are dry
Timed Dry
Manual time setting for specific drying durations
Quick Dry
Rapid drying for small loads in 30 minutes or less
Heavy Duty
Extended drying time for heavily soiled items
Delicates
Low heat setting for delicate fabrics and special care items
Air Fluff
No heat tumbling to freshen items or remove lint
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dryer won't start | Power issue, door not closed properly, start button not pressed | Check power supply, ensure door is latched completely, press start firmly |
| Clothes not drying | Lint filter clogged, vent blocked, improper cycle selection | Clean lint filter, check vent system, select appropriate drying cycle |
| Overheating | Restricted airflow, lint buildup, thermostat failure | Clean lint filter and vent system, check thermostat operation |
| Unusual noises | Foreign objects in drum, worn rollers or bearings | Check for foreign objects, inspect drum rollers and bearings |
| Vibration during operation | Unbalanced load, uneven floor, shipping bolts not removed | Redistribute load, level the dryer, ensure shipping bolts removed |
| Gas odor (Gas models) | Gas leak, improper combustion | Immediately turn off gas supply and contact qualified technician |
Error Codes
- F-01: Control board communication error - Reset dryer, check connections
- F-02: Motor triac error - Check motor operation and wiring
- F-03: Thermistor error - Check temperature sensor operation
- F-04: Heater error - Check heating element and thermal fuses
- F-05: Moisture sensor error - Clean moisture sensor bars
- F-07: Drive motor error - Check motor operation and belt
Manual Downloads
Current Model Manuals
MEDB855DW
7.4 cu. ft. Electric Dryer
MEDB855DG
7.4 cu. ft. Gas Dryer
MEDC465HW
7.0 cu. ft. Steam Dryer
MEDB765FW
7.3 cu. ft. Front Control Dryer
Popular Previous Models
MEDX655DW
7.4 cu. ft. Electric Dryer
MEDC400VW
7.0 cu. ft. Electric Dryer
MEDB835DW
6.7 cu. ft. Electric Dryer
MEDB800VW
6.5 cu. ft. Electric Dryer