Maytag A112 Washer Manual

The Maytag A112 is a top-loading washing machine with durable construction, multiple wash cycles, and advanced cleaning technology. This washer features automatic water level sensing, stainless steel tub, various wash settings for different fabric types, energy-efficient operation, and robust Maytag reliability. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Utilities 7. Operating the Washer 8. Maintenance Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Stainless steel wash basket, Automatic water level sensor, Multiple wash cycles, Heavy-duty motor, Lid lock mechanism, Control panel with digital display.

Feature	Description
Stainless steel tub	Durable, rust-resistant wash basket
Automatic water level	Senses load size for optimal water usage
Multiple wash cycles	Normal, Heavy Duty, Delicates, Quick Wash
Temperature controls	Hot, Warm, Cold water settings
Spin speed options	High, Medium, Low spin settings
Lid lock	Safety feature during operation
Digital display	Shows cycle time and settings
POWER	Turns washer on/off
START/PAUSE	Initiates or pauses wash cycle
CYCLE SELECT	Chooses wash program

Installation

Unpack and inspect contents. Place on level floor.

Remove shipping materials: Remove transit bolts and packing materials.
Level the washer: Adjust leveling legs until machine is stable.
Connect water supply: Attach hot and cold water hoses to faucets.
Connect drain hose: Position drain hose properly.
Plug into electrical outlet: Use grounded 120V outlet.

WARNING! Washer is heavy; use two people for moving. Ensure all connections are secure.

First-Time Setup

Power on washer; run initial test cycle.

Remove all packing materials: Check interior for any remaining items.
Level the unit: Adjust feet until washer doesn't rock.
Connect water supply: Turn on water faucets.
Run test cycle: Select Quick Wash cycle without clothes.
Check for leaks: Verify all connections are tight.

CAUTION! Ensure washer is level to prevent vibration during spin cycles.

Specifications

Capacity: 4.2 cubic feet
Dimensions: 27" W x 27" D x 42" H
Water Connections: Hot and Cold water inlet
Electrical: 120V, 60Hz, 15A
Wash Cycles: Normal, Heavy Duty, Delicates, Quick Wash, Rinse & Spin
Spin Speeds: High (800 RPM), Medium (600 RPM), Low (400 RPM)
Water Temperature: Hot, Warm, Cold settings
Control Type: Electronic with digital display
Warranty: 10-year limited parts warranty

Controls and Settings

Access settings via control panel. Front Panel: POWER, CYCLE SELECT, TEMPERATURE, SPIN SPEED, START/PAUSE.

Control Panel: Digital display shows cycle time, settings, and error codes. Cycle progress indicators show current stage of wash.

Wash Cycles: NORMAL (mixed loads), HEAVY DUTY (heavily soiled items), DELICATES (gentle fabrics), QUICK WASH (small loads), RINSE & SPIN (additional rinse). Temperature: HOT (whites), WARM (colors), COLD (bright colors). Spin Speed: HIGH (cotton), MEDIUM (synthetics), LOW (delicates).

Connecting Utilities

Water Supply: Hot and cold water connections. Drain: Proper drain hose installation.

Turn off water supply before connecting hoses.
Connect hot water to red inlet, cold to blue inlet.
Secure drain hose to standpipe or laundry tub.
Ensure electrical outlet is properly grounded.

Tip: Use thread seal tape on hose connections to prevent leaks.

Operating the Washer

Follow proper loading and cycle selection for best results.

Load clothes: Distribute items evenly around agitator.
Add detergent: Use recommended amount for load size.
Select cycle: Choose appropriate wash program.
Set temperature: Select water temperature for fabric type.
Set spin speed: Choose spin speed for fabric care.
Start cycle: Press START button.
Monitor progress: Digital display shows remaining time.
Remove clothes: Promptly after cycle completion.

WARNING! Do not overload washer. Follow manufacturer's load capacity guidelines.

Maintenance Features

Self-cleaning cycle: Run monthly to clean interior. Lid lock: Prevents opening during operation. Automatic balance system: Reduces vibration during spin.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Clean detergent dispenser regularly. Run self-clean cycle monthly.

CAUTION! Do not use abrasive cleaners. Keep control panel dry.

Regulatory Information

UL Listed: Complies with safety standards. Energy Star Certified: Meets energy efficiency guidelines. Copyright © 2025 Maytag; trademarks of Whirlpool Corporation. For support, visit www.maytag.com or contact 1-800-344-1274.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power/lid	Check power cord; ensure lid is closed properly.
No water filling	Water supply	Check water valves are on; inspect hoses for kinks.
Excessive vibration	Leveling/load	Ensure washer is level; redistribute load evenly.
Water doesn't drain	Drain hose	Check drain hose for obstructions; ensure proper height.
Error codes displayed	Various issues	Consult error code chart in manual; reset if needed.

Reset: Unplug for 5 minutes then restart.

Service: 1-800-344-1274; www.maytag.com